Inkjet-Printed In-Vitro Organic Electronic Devices

  • Hussain Asghar

Student thesis: Master's Thesis

Abstract

In-vitro electronic devices are promising to dynamically monitor minute-changes in biological systems. Electronic devices based on conducting polymers such as poly(3,4- ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) provide suitable and attractive substrates for biointerfacing. The soft polymer surface acts as a cushion for the living systems to interface while electronically detecting their properties. However, to this date, most bioelectronics devices have been fabricated via multi-step lithography techniques, which do not allow for mass fabrication and hence high throughput biosensing. Inkjet printing presents an alternative to fabricate organic bioelectronic devices. Besides being low-cost, inkjet printing allows to fabricate several devices in a short time with flexible design patterns and minimal material waste. Here, using inkjet printing, we fabricated PEDOT:PSS based organic electrochemical transistors (OECTs) for biomembrane interfacing. We optimized the deposition of various inks (silver nanoparticles (AgNPs), PEDOT:PSS, and the dielectric SU-8) used during the fabrication of these devices. We characterized the electrical characteristics of all-printed OECTs with various geometries and identified the high-performing ones. Due to the flexibility of ink optimization and design patterns, these all inkjet-printed electronic devices provide an alternative for mass production of biointerfacing platforms.
Date of AwardSep 2021
Original languageEnglish (US)
Awarding Institution
  • Biological, Environmental Science and Engineering
SupervisorSahika Inal (Supervisor)

Keywords

  • inkjet printing, printed organic electronics, in-vitro diagnostics

Cite this

'