Use of Super-Capacitor to Enhance Charging Performance of Stand-Alone Solar PV System

B. J. Huang, P. C. Hsu, P. Y Ho

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

Introduction: The battery charging performance in a stand-alone solar PV system affects the PV system efficiency and the load operating time. The New Energy Center of National Taiwan University has been devoted to the development of a PWM charging technique to continue charging the lead-acid battery after the overcharge point to increase the battery storage capacity by more than 10%. The present study intends to use the super-capacitor to further increase the charge capacity before the overcharge point of the battery. The super-capacitor is connected in parallel to the lead-acid battery. This will reduce the overall charging impedance during the charge and increase the charging current, especially in sunny weather. A system dynamics model of the lead-acid battery and super-capacitor was derived and the control system simulation was carried out to predict the charging performance for various weathers. It shows that the overall battery impedance decreases and charging power increases with increasing solar radiation. An outdoor comparative test for two identical PV systems with and without supercapacitor was carried out. The use of super-capacitor is shown to be able to increase the lead-acid charging capacity by more than 25% at sunny weather and 10% in cloudy weather. © Springer-Verlag Berlin Heidelberg 2011.
Original languageEnglish (US)
Title of host publicationSmart Innovation, Systems and Technologies
PublisherSpringer Nature
Pages139-147
Number of pages9
ISBN (Print)9783642173868
DOIs
StatePublished - 2011
Externally publishedYes

Fingerprint Dive into the research topics of 'Use of Super-Capacitor to Enhance Charging Performance of Stand-Alone Solar PV System'. Together they form a unique fingerprint.

Cite this