Urea-organic matrix method: An alternative approach to prepare Co-MoS 2/γ-Al2O3 HDS catalyst

Sergio L. González-Cortés*, Tian Cun Xiao, Pedro Da Costa, Bernardo Fontal, Malcolm L.H. Green

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

84 Scopus citations

Abstract

An alternative method using urea as organic matrix to prepare Co-MoS 2/γ-Al2O3 HDS catalysts based on drying (urea-matrix drying, UMxD) or combustion (urea-matrix combustion, UMxC) processes have been developed and compared with the traditional wet methods (sequential, WSI, and co-impregnation, WCI) and chelating method (ChM) in order to determine their influence on the HDS catalytic process. The catalytic performance of the alumina-supported Co-Mo catalysts was evaluated in a continuous flow reactor using the hydrodesulfurization of thiophene as a model reaction. The oxidic precursors and the sulfurized catalysts were characterized using elemental analysis, X-ray diffraction (XRD), laser Raman spectroscopy (LRS), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), high resolution transmission electron microscopy (HRTEM), temperature-programmed reduction (TPR-H2) and BET surface area measurements. It has been found that the urea-organic matrix method facilitates well-dispersed Co- and Mo-oxo species (mono and polymolybdate) formation, whereas the conventional impregnation techniques lead to mixed-metal oxides formation. This was reflected in the sulfurized phase morphology and structural disorder degree of carbon material deposited on the catalyst surface upon the sulfurizing process using thiophene as sulfurizing agent. The preparation method notably affects the thiophene-HDS specific rates, showing the following activity order: UMxD>UMxC>WCI>WSI>ChM, while an opposite trend for relative rate of HYD to HDS reactions was observed. A carbon structural effect together with high stacking degree of the sulfurized phases seem to be mainly responsible for the high HDS activity of alumina-supported Co-Mo catalysts prepared by the urea-organic matrix method, which appears very promising for HDS catalysts development.

Original languageEnglish (US)
Pages (from-to)209-222
Number of pages14
JournalApplied Catalysis A: General
Volume270
Issue number1-2
DOIs
StatePublished - Aug 30 2004

Keywords

  • Co-Mo catalyst
  • Combustion synthesis
  • Hydrodesulfurization
  • Preparation-method effect
  • Urea-organic matrix method

ASJC Scopus subject areas

  • Catalysis
  • Process Chemistry and Technology

Fingerprint

Dive into the research topics of 'Urea-organic matrix method: An alternative approach to prepare Co-MoS <sub>2</sub>/γ-Al<sub>2</sub>O<sub>3</sub> HDS catalyst'. Together they form a unique fingerprint.

Cite this