Towards an optimum silicon heterojunction solar cell configuration for high temperature and high light intensity environment

Amir Abdallah, Ounsi El Daif, Brahim Aïssa, Maulid Kivambe, Nouar Tabet, Johannes Seif, Jan Haschke, Jean Cattin, Mathieu Boccard, Stefaan De Wolf, Christophe Ballif

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

We report on the performance of Silicon Heterojunction (SHJ) solar cell under high operating temperature and varying irradiance conditions typical to desert environment. In order to define the best solar cell configuration that resist high operating temperature conditions, two different intrinsic passivation layers were tested, namely, an intrinsic amorphous silicon a-SiO:H with CO/SiH ratio of 0.4 and a-SiOx:H with CO/SiH ratio of 0.8, and the obtained performance were compared with those of a standard SHJ cell configuration having a-Si:H passivation layer. Our results showed how the short circuit current density J, and fill factor FF temperature-dependency are impacted by the cell's configuration. While the short circuit current density J for cells with a-SiO:H layers was found to improve as compared with that of standard a-Si:H layer, introducing the intrinsic amorphous silicon oxide (a-SiO:H) layer with CO/SiH ratio of 0.8 has resulted in a reduction of the FF at room temperature due to hindering the carrier transport by the band structure. Besides, this FF was found to improve as the temperature increases from 15 to 45°C, thus, a positive FF temperature coefficient.
Original languageEnglish (US)
Pages (from-to)331-337
Number of pages7
JournalEnergy Procedia
Volume124
DOIs
StatePublished - Sep 22 2017

Fingerprint Dive into the research topics of 'Towards an optimum silicon heterojunction solar cell configuration for high temperature and high light intensity environment'. Together they form a unique fingerprint.

Cite this