Thick film microsensors based on nanosized titania sol-gel powder

M. C. Carotta*, M. A. Butturi, G. Martinelli, M. L. Di Vona, S. Licoccia, E. Traversa

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

Thick films of nanostructured TiO2 and tantalum-doped TiO2 have been fabricated by screen-printing technology starting from pure titania and tantalum-doped titania powders prepared by sol-gel method. The titania powders, obtained via sol gel, show crystalline anatase structure and the particles are homogeneous and nanosized (30÷50 nm). Two series of films each one composed by pure and Ta-doped titania samples have been obtained by firing the pastes in air atmosphere at the temperatures of 650 °C and 850 °C, respectively. SEM observations and electrical characterizations showed that the firing temperature strongly influences the nanostructure and the gas response of the pure titania samples. The addition of tantalum inhibits the grain sintering at the higher temperature. Moreover the electrical data show that the tantalum addition (10 at.%) does not affect the conductance of the films in air while significantly enhances the response towards CO and leaves almost unaltered or enhances its ability to sense NO2 depending on the thermal treatments.

Original languageEnglish (US)
Pages (from-to)113-117
Number of pages5
JournalElectron Technology (Warsaw)
Volume33
Issue number1
StatePublished - 2000
Externally publishedYes

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint

Dive into the research topics of 'Thick film microsensors based on nanosized titania sol-gel powder'. Together they form a unique fingerprint.

Cite this