The effects of initial rise and axial loads on MEMS arches

Sherif Adekunle Tella, Amal Z. Hajjaj, Mohammad I. Younis

Research output: Contribution to journalArticlepeer-review

10 Scopus citations

Abstract

Arch microbeams have been utilized and proposed for many uses over the past few years due to their large tunability and bistability. However, recent experimental data have shown different mechanical behavior of arches when subjected to axial loads. This paper aims to investigate in depth the influence of the competing effects of initial rise and axial loads on the mechanical behavior of micromachined arches; mainly their static deflection and resonant frequencies. Based on analytical solutions, the static response and eigenvalue problems are analyzed for various values of initial rises and axial loads. Universal curves showing the variation of the first three resonance frequencies of the arch are generated for various values of initial rise under both tensile and compressive axial loads. This study shows that increasing the tensile or compressive axial loads for different values of initial rise may lead to either increase in the stiffness of the beam or initial decrease in the stiffness, which later increases as the axial load is increased depending on the dominant effect of the initial rise of the arch and the axial load. The obtained universal curves represent useful design tools to predict the tunability of arches under axial loads for various values of initial rises. The use of the universal curves is demonstrated with an experimental case study. Analytical formulation is developed to predict the point of minimum where the trend of the resonance frequency versus axial loads changes qualitatively due to the competing effects of axial loads and initial curvature.
Original languageEnglish (US)
JournalJournal of Vibration and Acoustics
Volume139
Issue number4
DOIs
StatePublished - Apr 7 2017

Fingerprint

Dive into the research topics of 'The effects of initial rise and axial loads on MEMS arches'. Together they form a unique fingerprint.

Cite this