Temperature dependence of the work function of ruthenium-based gate electrodes

Husam Niman Alshareef*, H. C. Wen, H. F. Luan, K. Choi, H. R. Harris, Y. Senzaki, P. Majhi, B. H. Lee, B. Foran, G. Lian

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

The effect of device fabrication temperature on the work function of ruthenium (Ru) metal gate and its bilayers was investigated. The work function shows strong temperature dependence when Ru electrodes are deposited on silicon oxide, SiO2, but not on hafnium silicates (HfSiOx). Specifically, the work function of Ru on SiO2 increased from 4.5 eV at 500 °C to 5.0 eV at 700 °C. On further annealing to 900 °C or higher, the work function dropped to about 4.4 eV. In the case of HfSiOx, the work function of Ru changed by less than 100 mV over the same temperature range. Identical temperature dependence was observed using hafnium (Hf)/Ru and tantalum (Ta)/Ru bilayers. However, the peak values of the work function decreased with increasing Hf/Ru and Ta/Ru thickness ratios. Materials analysis suggests that these trends are driven by interactions at the Ru metal gate-dielectric interface.

Original languageEnglish (US)
Pages (from-to)1294-1298
Number of pages5
JournalThin Solid Films
Volume515
Issue number4
DOIs
StatePublished - Dec 5 2006

Keywords

  • Gate electrodes
  • Hafnium silicon oxide
  • Ruthenium
  • Work function

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Cite this