Synthesis and characterisation of Gd-doped BaTiO3 thin films prepared by laser ablation for optoelectronic applications

A. Y. Fasasi*, B. D. Ngom, J. B. Kana-Kana, R. Bucher, M. Maaza, C. Theron, Ulrich Buttner

*Corresponding author for this work

    Research output: Contribution to journalArticlepeer-review

    26 Scopus citations

    Abstract

    The results of gadolinium (Gd)-doped barium titanate (BaTiO3) thin films prepared by laser ablation on glass and silicon substrates are reported. Rutherford backscattering (RBS) analyses carried out on glass samples indicated the substitution of barium (Ba) by gadolinium (Gd) after annealing, leading to a film with composition Ba0.76TiGd0.01O2.5. There is a reduction in the thickness from 2.21 to 2.02 microns for as-deposited and annealed films. The films on silicon showed a higher degree of crystallinity compared to that of glass substrates due to increased annealing temperature. The average grain size calculated using the X-ray diffraction (XRD) pattern from silicon substrates was 30 nm. The film has a tetragonal structure with a "c/a" ratio of 1.03 signifying that the incorporation of Gd in BaTiO3 led to the elongation of the c-axis. The percentage transmittance reduced from 80 to 50% due to annealing and this is probably due to structural changes in the film. Swanepoel envelope method employed on the interference fringes of the transmittance pattern led to the determination of the variation of the refractive index with wavelength. Sellmier single oscillator model was applied to determine the optical constants of the films on glass substrates. Bandgap analyses carried out showed the reduction in bandgap with annealing and also the possibility that Gd incorporation has modified the film chemistry leading to the existence of direct (4.35 eV) and indirect (3.88 eV) allowed transitions in the annealed films. Dielectric property measurement carried out under ambient conditions gave a relaxation time τ of 1.6×10-4 s and conduction by small polaron with the onset of polaron conduction set at about 7 kHz. It is conjectured that these properties, especially the high refractive index and the high bandgaps, can make Gd-doped BaTiO3 a good candidate for optoelectronic applications.

    Original languageEnglish (US)
    Pages (from-to)1322-1329
    Number of pages8
    JournalJournal of Physics and Chemistry of Solids
    Volume70
    Issue number10
    DOIs
    StatePublished - Oct 1 2009

    Keywords

    • A. Ceramics
    • A. Oxides
    • A. Thin films
    • D. Dielectric properties
    • D. Optical properties

    ASJC Scopus subject areas

    • Chemistry(all)
    • Materials Science(all)
    • Condensed Matter Physics

    Fingerprint

    Dive into the research topics of 'Synthesis and characterisation of Gd-doped BaTiO<sub>3</sub> thin films prepared by laser ablation for optoelectronic applications'. Together they form a unique fingerprint.

    Cite this