Surface of Ti-Ni alloys after their preparation

I. Saldan*, J. Frenzel, Osama Shekhah, R. Chelmowski, A. Birkner, Ch Wöll

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

14 Scopus citations

Abstract

The Ti3.87Ni1.73Fe0.7O0.3, Ti3.87Ni1.73Fe0.4N0.3 and Ti3.87Ni1.73Fe0.4C0.3 alloys were investigated regarding their surface characteristics. The scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS) was used for phase characterization. The X-ray photoelectron spectroscopy (XPS) was used to analyze the chemical composition of alloy surface. The atomic force microscopy (AFM) to observe alloy surface topography after cutting and electrochemical polishing separately has been done. The transmission electron microscopy (TEM) with X-ray diffraction was carried out to get a high contrast images and the diffraction pattern from alloy surface. The results clearly shown, that all alloys were multiphase, and their surface was totally oxidized with no pure metals.

Original languageEnglish (US)
Pages (from-to)568-573
Number of pages6
JournalJournal of Alloys and Compounds
Volume470
Issue number1-2
DOIs
StatePublished - Feb 20 2009

Keywords

  • AFM
  • Alloy preparation
  • Phase composition
  • Surface topography
  • TEM
  • XPS

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Surface of Ti-Ni alloys after their preparation'. Together they form a unique fingerprint.

Cite this