Superheating of ice slurry in melting heat exchangers

P. Pronk*, C. A. Infante Ferreira, Geert-Jan Witkamp

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

One of the main components of an ice slurry system is the melting heat exchanger, in which ice slurry absorbs heat resulting in the melting of ice crystals. Design calculations of melting heat exchangers are mainly based on heat transfer and pressure drop data, but recent experimental studies have shown that superheating of ice slurry should also be considered. This paper presents ice slurry melting experiments with a tube-in-tube heat transfer coil. The experimental results indicate that operating conditions such as ice slurry velocity, heat flux, solute concentration, ice fraction, and ice crystal size determine the degree of superheating. The various influences are explained by considering the melting process as a two-stage process consisting of the heat transfer between wall and liquid and the combined heat and mass transfer between liquid and crystals. Bigger ice crystals and higher solute concentrations decrease the rate of the second stage and therefore increase the degree of superheating.

Original languageEnglish (US)
Pages (from-to)911-920
Number of pages10
JournalInternational Journal of Refrigeration
Volume31
Issue number5
DOIs
StatePublished - Aug 1 2008

Keywords

  • Experiment
  • Heat exchanger
  • Heat transfer
  • Ice slurry
  • Mass transfer
  • Melting
  • Parameter
  • Superheating

ASJC Scopus subject areas

  • Building and Construction
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Superheating of ice slurry in melting heat exchangers'. Together they form a unique fingerprint.

Cite this