Static and dynamic amplification using strong mechanical coupling

Saad Ilyas, Nizar Jaber, Mohammad I. Younis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Amplifying the signal-to-noise ratio of resonant sensors is vital toward the effort to miniaturize devices into the sub-micro and nano regimes. In this work, we demonstrate theoretically and experimentally amplification through mechanically coupled microbeams. The device is composed of two identical clampedclamped beams, made of polyimide, connected at their middle through a third beam, which acts as a mechanical coupler. Each of the clamped-clamped microbeams and the coupler are designed to be actuated separately, hence providing different possibilities of actuation and sensing. The coupled system is driven into resonance near its first resonance mode and its dynamics is explored via frequency sweeps. The results show significant amplification in the resonator's amplitude when the signal is measured at the midpoint of the coupler, compared to the response of the individual uncoupled beams. The static pullin characteristics of the system are also studied. It is shown that the compliant mechanical coupler can serve as a low-power RF switch actuated at low voltage loads.
Original languageEnglish (US)
Title of host publicationASME 2016 International Mechanical Engineering Congress and Exposition, IMECE 2016
PublisherAmerican Society of Mechanical Engineers (ASME) infocentral@asme.org
ISBN (Print)9780791850640
DOIs
StatePublished - Feb 8 2017

Fingerprint

Dive into the research topics of 'Static and dynamic amplification using strong mechanical coupling'. Together they form a unique fingerprint.

Cite this