Soft chemistry routes for the synthesis of Sr0.02La 0.98Nb0.6Ta0.4O4 proton conductor

Alma B. Santibáñez-Mendieta*, Emiliana Fabbri, Silvia Licoccia, Enrico Traversa

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

1 Scopus citations

Abstract

Proton conducting Sr0.02La0.98Nb0.6Ta 0.4O4 powders were prepared by auto-combustion or co-precipitation methods from aqueous solutions using citrates and oxalates as complexing agents. After calcination at 1100C the two methods lead to powders with sub-micrometric average particle size, 0.5 μm and 0.7 μm, respectively. Upon sintering at 1600C, pellets with an average grain size of 11 m for the auto-combustion method and of 7 μm for the co-precipitation method were obtained. The electrical conductivity measured on sintered pellets at 800C in wet argon atmosphere was 1.9 ×10-4 S cm-1 for the material obtained by co-precipitation method, 1.8× 10-4 S cm-1 for the one derived from auto-combustion method, and 7.4× 10-5 S cm-1 for the one produced by solid state reaction. The improvement in conductivity of the wet chemistry methods with respect to the solid state reaction was ascribed to the better control of the cation mixing with the synthetic conditions.

Original languageEnglish (US)
Pages (from-to)B1485-B1490
JournalJournal of the Electrochemical Society
Volume158
Issue number12
DOIs
StatePublished - Nov 22 2011

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Soft chemistry routes for the synthesis of Sr<sub>0.02</sub>La <sub>0.98</sub>Nb<sub>0.6</sub>Ta<sub>0.4</sub>O<sub>4</sub> proton conductor'. Together they form a unique fingerprint.

Cite this