Simultaneous OH- and formaldehyde-LIF measurements in an HCCI engine

Robert Collin*, Jenny Nygren, Mattias Richter, Marcus Aldén, Leif Hildingsson, Bengt Johansson

*Corresponding author for this work

Research output: Contribution to conferencePaperpeer-review

48 Scopus citations

Abstract

Simultaneous OH- and formaldehyde LIF measurements have been performed in an HCCI engine using two laser sources working on 283 and 355 nm, respectively. Two ICCD camera systems, equipped with long-pass filters, were used to collect the LIF signals. The simultaneous images of OH and formaldehyde were compared with heat-release calculated from the pressure-trace matching the cycle for the LIF measurements. The measurements were performed on a 0.5 l single-cylinder optical engine equipped with port-fuel injection system. A blend of iso-octane and n-heptane was used as fuel and the compression ratio was set to 12:1. The width of the laser sheet was 40 mm and hence covered approximately half of the cylinder bore. At some 20 CAD BTDC low temperature reactions is present and formaldehyde is formed. The formaldehyde signal is then rather constant until the main heat-release starts just before TDC, where the signal decreases rapidly to low values. From some 15 CAD to 5 CAD BTDC the formaldehyde is uniformly distributed in the imaged area. As formaldehyde decreases, OH increases and follows the main rate of heat release curve, though with a slight lag in phase. Thereafter OH is formed in the areas from which the formaldehyde has disappeared and the OH signal is present to some 20 CAD ATDC.

Original languageEnglish (US)
DOIs
StatePublished - Dec 1 2003
EventPowertrain and Fluid Systems Conference and Exhibition - Pittsburgh, PA, United States
Duration: Oct 27 2003Oct 30 2003

Other

OtherPowertrain and Fluid Systems Conference and Exhibition
CountryUnited States
CityPittsburgh, PA
Period10/27/0310/30/03

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Simultaneous OH- and formaldehyde-LIF measurements in an HCCI engine'. Together they form a unique fingerprint.

Cite this