Silicon heterojunction solar cells with electron selective TiOx contact

Xinbo Yang*, Peiting Zheng, Qunyu Bi, Klaus Weber

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

116 Scopus citations

Abstract

Silicon solar cells featuring carrier selective contacts have been demonstrated to reach ultra-high conversion efficiency. In this work, the electron-selective contact characteristics of ultrathin TiOx films deposited by atomic layer deposition on silicon are investigated via simultaneous consideration of the surface passivation quality and the contact resistivity. Thin TiOx films are demonstrated to provide not only good passivation to silicon surfaces, but also allow a relative low contact resistivity at the TiOx/Si heterojunction. A maximum implied open-circuit voltage (iVoc) of ~703 mV is achieved with the passivation of a 4.5 nm TiOx film, and a relatively low contact resistivity of (~0.25 Ω cm2 is obtained at the TiOx/n-Si heterojunction simultaneously. N-type silicon solar cell with the champion efficiency of 20.5% is achieved by the implementation of a full-area electron-selective TiOx contacts. A simulated efficiency of up to 23.7% is achieved on the n-type solar cell with a full-area TiOx contact. The efficient, low cost electron-transporting/hole-blocking TiOx layer enables the fabrication of high efficiency silicon solar cells with a simplified process flow.

Original languageEnglish (US)
Pages (from-to)32-38
Number of pages7
JournalSolar Energy Materials and Solar Cells
Volume150
DOIs
StatePublished - Jun 1 2016

Keywords

  • Carrier selective contact
  • Heterojunctions
  • Solar cells
  • Titanium dioxide

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films

Fingerprint

Dive into the research topics of 'Silicon heterojunction solar cells with electron selective TiO<sub>x</sub> contact'. Together they form a unique fingerprint.

Cite this