Residual gas visualization with laser induced fluorescence

Bengt Johansson*, Hans Neij, Greger Juhlin, Marcus Aldén

*Corresponding author for this work

Research output: Contribution to conferencePaperpeer-review

11 Scopus citations

Abstract

The influence of residual gases on the cycle-to-cycle variations in engine combustion was investigated. Two-photon planar laser-induced fluorescence was used for 2D-visualization of residual gas water. In order to avoid influence from fuel fluorescence and inhomogeneities premixed natural gas was used as fuel. Measurements were conducted at different load conditions with varying inlet manifold pressure. To find out how the residual gas distribution influences the combustion process the pressure development during combustion was monitored. From the pressure information a measure of the combustion rate at different phases of the flame development was calculated. The correlation between residual gas distribution and combustion rate was evaluated on a cycle to cycle basis. The results show that with an inlet manifold pressure of 0.3 bar the correlation between residual gas fraction and rate of combustion were 0.5-0.6. At full load though, lower correlation was found.

Original languageEnglish (US)
DOIs
StatePublished - Dec 1 1995
EventFuels and Lubricants Meeting and Exposition - Toronto, ON, Canada
Duration: Oct 16 1995Oct 19 1995

Other

OtherFuels and Lubricants Meeting and Exposition
CountryCanada
CityToronto, ON
Period10/16/9510/19/95

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Residual gas visualization with laser induced fluorescence'. Together they form a unique fingerprint.

Cite this