Organic-inorganic CO2 selective membranes prepared by the sol-gel process

C. Nistor, S. Shishatskiy, M. Popa, Suzana Nunes*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

Composite membranes prepared from mixtures of 3-glycidoxypropyl trimethoxysilane (GPTMS) and different diamines containing polyether segments were synthesized by the sol-gel process. The membranes were obtained by coating asymmetric porous polyacrylonitrile (PAN) supports with the silane solutions. The composite membranes were characterized by single and mixed gas permeation and by atomic force microscopy. The selectivity increased by increasing the molecular weight of the poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol)bis(2-aminopropyl ether) (PAPE), and also with the addition of poly(ethylene glycol) (PEG) to the coating solution. The CO2/N2 selectivity values up to 75 and the CO2/CH4 selectivity values up to 20 were measured. High gas selectivity was also confirmed by measurements with mixed gas feed, although slightly lower than in the measurements with single gases.

Original languageEnglish (US)
Pages (from-to)3392-3411
Number of pages20
JournalSeparation Science and Technology (Philadelphia)
Volume44
Issue number14
DOIs
StatePublished - Jan 1 2014

Keywords

  • CO/N separation
  • Epoxy silane
  • Gas separation
  • Organic-inorganic membranes
  • Sol-gel

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Process Chemistry and Technology
  • Filtration and Separation

Fingerprint

Dive into the research topics of 'Organic-inorganic CO<sub>2</sub> selective membranes prepared by the sol-gel process'. Together they form a unique fingerprint.

Cite this