Numerical simulation of solar-assisted multi-effect distillation (SMED) desalination systems

Youngdeuk Kim, Kyaw Thu, Aung Myat, K. C. Ng

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

We present a simulation model for the transient behavior of solar-assisted seawater desalination plant that employs the evacuated-tube collectors in conjunction with a multieffect distillation plant of nominal water production capacity of 16m3/day. This configuration has been selected due to merits in terms of environment-friendliness and energy efficiency. The solar-assisted multi-effect distillation system comprises 849 m2 of evacuated-tube collectors, 280 m3 water storage tanks, auxiliary heater, and six effects and a condenser. The present analysis employs a baseline configuration, namely; (i) the local solar insolation input (Jeddah, Saudi Arabia), (ii) a coolant flow rate through the headers of collector based on ASHRAE standards, (iii) a heating water demand, and (iv) the augmentation of water temperature by auxiliary when the supply temperature from the solar tank drops below the set point. It is observed that the annual collector efficiency and solar fraction decrease from 57.3 to 54.8% and from 49.4 to 36.7%, respectively, with an increase in the heating water temperature from 80 to 90 °C. The overall water production rate and the performance ratio increase slightly from 0.18 to 0.21 kg/s and from 4.11 to 4.13, respectively. © 2013 Desalination Publications.
Original languageEnglish (US)
Pages (from-to)1242-1253
Number of pages12
JournalDesalination and Water Treatment
Volume51
Issue number4-6
DOIs
StatePublished - Jan 2013

ASJC Scopus subject areas

  • Pollution
  • Water Science and Technology
  • Ocean Engineering

Fingerprint Dive into the research topics of 'Numerical simulation of solar-assisted multi-effect distillation (SMED) desalination systems'. Together they form a unique fingerprint.

Cite this