Nanofabrication of Isoporous Membranes for Cell Fractionation

Ainur Sabirova, Florencio Jr Pisig, Naganand Rayapuram, Heribert Hirt, Suzana Pereira Nunes

Research output: Contribution to journalArticlepeer-review

6 Scopus citations

Abstract

Cell fractionations and other biological separations frequently require several steps. They could be much more effectively done by filtration, if isoporous membranes would be available with high pore density, and sharp pore size distribution in the micro- and nanoscale. We propose a combination of two scalable methods, photolithography and dry reactive ion etching, to fabricate a series of polyester membranes with isopores of size 0.7 to 50 μm and high pore density with a demonstrated total area of 38.5 cm2. The membranes have pore sizes in the micro- and submicro-range, and pore density 10-fold higher than track-etched analogues, which are the only commercially available isoporous polymeric films. Permeances of 220,000 L m-2 h-1bar-1 were measured with pore size 787 nm. The method does not require organic solvents and can be applied to many homopolymeric materials. The pore reduction from 2 to 0.7 μm was obtained by adding a step of chemical vapor deposition. The isoporous system was successfully demonstrated for the organelle fractionation of Arabidopsis homogenates and could be potentially extended to other biological fractionations.
Original languageEnglish (US)
JournalScientific Reports
Volume10
Issue number1
DOIs
StatePublished - Apr 9 2020

Fingerprint

Dive into the research topics of 'Nanofabrication of Isoporous Membranes for Cell Fractionation'. Together they form a unique fingerprint.

Cite this