Modelling product distribution of pyrolysis gasoline hydroprocessing on a Pt-Pd/HZSM-5 catalyst

A. Gutierrez, P. Castaño, M. J. Azkoiti, J. Bilbao, J. M. Arandes

Research output: Contribution to journalArticlepeer-review

10 Scopus citations

Abstract

The hydrocracking of pyrolysis gasoline (70wt% of aromatics) has been studied using an integral fixed bed reactor with a Pt-Pd/HZSM-5 (0.2wt% Pt, 0.48wt% Pd; SiO2/Al2O3=19) catalyst over a wide range of experimental conditions: 350-450°C; 20-50bar; PPyGas=1bar, H2:PyGas molar ratio (nH2), 20-49; WHSV, 2.7-32h-1; Under these experimental conditions the deactivation is negligible and therefore data in the stationary state have been reported. Based on previous models for the hydrocracking of model compounds (methylcyclohexane and toluene), we have proposed a kinetic diagram and kinetic equations that satisfactorily describe the product distribution under the experimental conditions studied. The experimental data have been fitted to the proposed model and its parameters have been estimated. The kinetic model is used for reactor simulation and optimization. © 2011 Elsevier B.V.
Original languageEnglish (US)
JournalChemical Engineering Journal
Volume176-177
DOIs
StatePublished - Dec 1 2011
Externally publishedYes

Bibliographical note

Generated from Scopus record by KAUST IRTS on 2019-08-08

Fingerprint Dive into the research topics of 'Modelling product distribution of pyrolysis gasoline hydroprocessing on a Pt-Pd/HZSM-5 catalyst'. Together they form a unique fingerprint.

Cite this