Mass and Position Determination in MEMS Resonant Mass Sensors: Theoretical and Experimental Investigation

Adam M. Bouchaala, Ali H. Nayfeh, Nizar Jaber, Mohammad I. Younis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

We present a method to determine accurately the position and mass of an entity attached to the surface of an electrostatically actuated clamped-clamped microbeam implemented as a mass sensor. In the theoretical investigation, the microbeam is modeled as a nonlinear Euler-Bernoulli beam and a perturbation technique is used to develop a closed-form expression for the frequency shift due to an added mass at a specific location on the microbeam surface. The experimental investigation was conducted on a microbeam made of Polyimide with a special lower electrode to excite both of the first and second modes of vibration. Using an ink-jet printer, we deposited droplets of polymers with a defined mass and position on the surface of the microbeam and we measured the shifts in its resonance frequencies. The theoretical predictions of the mass and position of the deposited droplets match well with the experimental measurements.
Original languageEnglish (US)
Title of host publicationVolume 6: 12th International Conference on Multibody Systems, Nonlinear Dynamics, and Control
PublisherASME International
ISBN (Print)9780791850183
DOIs
StatePublished - Dec 5 2016

Fingerprint Dive into the research topics of 'Mass and Position Determination in MEMS Resonant Mass Sensors: Theoretical and Experimental Investigation'. Together they form a unique fingerprint.

Cite this