Linear transient flow solution for primary oil recovery with infill and conversion to water injection

Eric D. Zwahlen*, Tad W. Patzek

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

2 Scopus citations

Abstract

We present analytical solutions for primary production, producer infills and early response to waterflood in a low permeability, compressible, layered reservoir filled with oil, water and gas. The sample calculations are for the California Diatomites, but the equations apply to other tight rock systems. Primary oil recovery from rows of hydrofractured wells in a low permeability reservoir is described by linear transient flow of oil, water and gas with the concomitant pressure decline. During primary, it may be desirable to drill infill wells to accelerate oil production. At some later time, the infill wells may be converted into waterflood injectors for pressure support and incremental oil recovery. In this paper, we analyze the pressure response and fluid flow rates due to the original wells and infill wells drilled halfway between the original wells, and - finally - due to water injection at the infill wells. All of the formation and fluid properties are described by a single hydraulic diffusivity, α, assumed to be independent of time and production or injection. We solve the one-dimensional pressure diffusion equation analytically using pressure boundary conditions at the original and infill wells and use superposition to account for the water injection. We give solutions for the pressure in the formation and discuss how to calculate oil, water and gas rates and cumulatives as functions of time at both the original wells and infill wells. Finally, we present a computational example of oil production from a stack of seven diatomite layers with different properties and show the effects of infill wells and water injection on the total oil production. We show that results of this analytical solution and a compositional numerical simulation for primary production in the diatomite agree well. Our analysis can predict the onset of pressure depletion and quantify how long to produce from the infill wells before injecting water. It shows that producing from the infill well for a few years significantly increases the production from the field and can minimize the lost production at the infill well due to conversion to a waterflood injector. Our analysis also generates very reliable, well-by-well, field-wise forecasts of fluid production and water injection.

Original languageEnglish (US)
Title of host publicationA New Dawn in the Old West
Editors Anon
PublisherSociety of Petroleum Engineers (SPE)
Pages305-320
Number of pages16
StatePublished - 1997
Externally publishedYes
EventProceedings of 1997 67th Annual Western Regional Meeting - Long Beach, CA, USA
Duration: Jun 25 1997Jun 27 1997

Other

OtherProceedings of 1997 67th Annual Western Regional Meeting
CityLong Beach, CA, USA
Period06/25/9706/27/97

ASJC Scopus subject areas

  • Geology
  • Geotechnical Engineering and Engineering Geology

Fingerprint Dive into the research topics of 'Linear transient flow solution for primary oil recovery with infill and conversion to water injection'. Together they form a unique fingerprint.

Cite this