Lattice disorder and texture in diamond coatings deposited by HFCVD on Co-cemented tungsten carbide

P. Scardi*, S. Veneri, M. Leoni, R. Polini, E. Traversa

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

13 Scopus citations

Abstract

Diamond coatings were deposited by hot filament chemical vapour deposition on 5,8 wt.% Co-cemented tungsten carbide (WC-Co). Under the same deposition conditions, two sets of samples were produced by varying the CH4 percentage (0.5 and 1.0%) in the H2 atmosphere, and changing the substrate temperature in the range 650-950°C. The effect of different CH4 percentage and of temperature on diamond microstructure was investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In particular, pole figure measurement and line profile analysis (LPA) were used to study diamond texture and lattice disorder, respectively. Diamond grains were not preferentially oriented for deposition temperatures below 800°C. Above this temperature, a [111] fibre texture developed in samples deposited with 0.5% CH4 in H2. The XRD profile broadening indicated a marked increase of lattice disorder in the diamond film with increasing deposition temperature. This observation was correlated with the Raman peak broadening, also attributed to lattice disorder effects. A detailed LPA showed a decrease of crystallite mean size and a corresponding microstrain increase with raising temperature, although SEM morphological observations indicated a progressive grain coarsening at higher deposition temperatures.

Original languageEnglish (US)
Pages (from-to)136-142
Number of pages7
JournalThin Solid Films
Volume290-291
DOIs
StatePublished - Dec 15 1996
Externally publishedYes

Keywords

  • Chemical vapour deposition
  • Coatings
  • Lattice parameters
  • Tungsten carbide

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Lattice disorder and texture in diamond coatings deposited by HFCVD on Co-cemented tungsten carbide'. Together they form a unique fingerprint.

Cite this