Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells

Stephanie R. Dupont, Mark Oliver, Frederik C. Krebs, Reinhold H. Dauskardt

Research output: Contribution to journalArticlepeer-review

174 Scopus citations

Abstract

The interlayer adhesion of roll-to-roll processed flexible inverted P3HT:PCBM bulk heterojunction (BHJ) polymer solar cells is reported. Poor adhesion between adjacent layers may result in loss of device performance from delamination driven by the thermomechanical stresses in the device. We demonstrate how a thin-film adhesion technique can be applied to flexible organic solar cells to obtain quantitative adhesion values. For the P3HT:PCBM-based BHJ polymer solar cells, the interface of the BHJ with the conductive polymer layer PEDOT:PSS was found to be the weakest. The adhesion fracture energy varied from 1.6 J/m2 to 0.1 J/m2 depending on the composition of the P3HT:PCBM layer. Post-deposition annealing time and temperature were shown to increase the adhesion at this interface. Additionally the PEDOT:PSS cells are compared with V2O5 cells whereby adhesive failure marked by high fracture energies was observed. © 2011 Elsevier B.V.
Original languageEnglish (US)
Pages (from-to)171-175
Number of pages5
JournalSolar Energy Materials and Solar Cells
Volume97
DOIs
StatePublished - Feb 2012
Externally publishedYes

Fingerprint

Dive into the research topics of 'Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells'. Together they form a unique fingerprint.

Cite this