Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells

Suzana Nunes*, B. Ruffmann, E. Rikowski, S. Vetter, K. Richau

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

347 Scopus citations

Abstract

New organic-inorganic composite membranes based on sulfonated polyetherketone (SPEK) and sulfonated poly(ether ether ketone) (SPEEK) for application in the direct methanol fuel cell (DMFC) were synthesized. The membranes' water and methanol permeabilities were evaluated in pervaporation experiments and the conductivity determined by impedance spectroscopy. The permeabilities were decreased by inorganic modification. The first approach was the in situ generation of SiO2, TiO2 or ZrO2. The modification with ZrO2 led to a 60-fold reduction of the methanol flux. However, a 13-fold reduction of conductivity was also observed. Modification with organically modified silane led to a 40-fold decrease of the water permeability without a large decrease of proton conductivity. A good balance of high conductivity and low water and methanol permeability was possible with a mixture of ZrO2 and zirconium phosphate. In this case, a 28-fold reduction of water flux was observed with only 10-30% reduction of proton conductivity.

Original languageEnglish (US)
Pages (from-to)215-225
Number of pages11
JournalJournal of Membrane Science
Volume203
Issue number1-2
DOIs
StatePublished - Jun 30 2002

Keywords

  • Conductive polymer
  • Proton conductivity
  • Zirconium phosphate

ASJC Scopus subject areas

  • Filtration and Separation
  • Polymers and Plastics

Fingerprint

Dive into the research topics of 'Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells'. Together they form a unique fingerprint.

Cite this