Gas temperature above a porous radiant burner: Comparison of measurements and model predictions

Marc D. Rumminger*, Robert Dibble, Norbert H. Heberle, David R. Crosley

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

63 Scopus citations

Abstract

Radiant burner modeling can help clarify issues related to burner development, design and performance. This paper describes a one-dimensional model that simulates bilayered reticulated ceramic radiant burner operation. We represent combustion in a porous medium with a model that includes multistep chemistry, radiative heat transfer in the porous medium, and separate gas and solid energy equations. Species predictions show that almost all of the methane is consumed within the porous medium, the concentration peaks of most radicals are inside the porous medium, and nearly all of the NO is formed in the porous medium. As part of a program to develop a comprehensive radiant burner model, temperature measurements are made above a reticulated ceramic radiant burner. Uncoated fine-wire thermocouples are used to measure gas temperature. A radiation correction that includes radiant flux from the burner is used to adjust the thermocouple measurements. Corrections of 200-300 K are calculated, owing to a relatively large bead (460 μm) and high bead emissivity. OH laser-induced fluorescence (LIF) and laser absorption are also used to determine the gas temperature. The LIF-determined temperatures are corrected for trapping, partial rotational relaxation, and rotational-dependent quantum yields. OH-LIF temperature measurements are slightly higher than thermocouple measurements. Compared to experimental results, the model overpredicts the gas temperature above the burner. Several factors could account for the deviation, including uncertainty in the porous medium properties and the possibility that the chemistry is affected by the solid surface in the porous medium.

Original languageEnglish (US)
Pages (from-to)1755-1762
Number of pages8
JournalSymposium (International) on Combustion
Volume26
Issue number1
DOIs
StatePublished - Jan 1 1996

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Mechanical Engineering
  • Physical and Theoretical Chemistry
  • Fluid Flow and Transfer Processes

Fingerprint

Dive into the research topics of 'Gas temperature above a porous radiant burner: Comparison of measurements and model predictions'. Together they form a unique fingerprint.

Cite this