Fabrication variables affecting the structure and properties of supported carbon molecular sieve membranes for hydrogen separation

Kelly Briceño, Daniel Montané, Ricard Garcia-Valls, Adolfo Iulianelli, Angelo Basile

Research output: Contribution to journalArticlepeer-review

51 Scopus citations

Abstract

A high molecular weight polyimide (Matrimid) was used as a precursor for fabricating supported carbon molecular sieve membranes without crack formation at 550-700°C pyrolysis temperature. A one-step polymer (polyimide) coating method as precursor of carbon layer was used without needing a prior modification of a TiO 2 macroporous support. The following fabrication variables were optimized and studied to determine their effect on the carbon structure: polymeric solution concentration, solvent extraction, heating rate and pyrolysis temperature. Two techniques (Thermogravimetric analysis and Raman spectroscopy) were used to determine these effects on final carbon structure. Likewise, the effect of the support was also reported as an additional and important variable in the design of supported carbon membranes. Atomic force microscopy and differential scanning calorimetry quantified the degree of influence. Pure gas permeation tests were performed using CH 4, CO, CO 2 and H 2. The presence of a molecular sieving mechanism was confirmed after defects were plugged with PDMS solution at 12wt%. Gas selectivities higher than Knudsen theoretical values were reached with membranes obtained over 650°C, showing as best values 4.46, 4.70 and 10.62 for H 2/N 2, H 2/CO and H 2/CH 4 ratio, respectively. Permeance values were over 9.82×10 -9mol/(m 2Pas)during pure hydrogen permeation tests. © 2012 Elsevier B.V.
Original languageEnglish (US)
Pages (from-to)288-297
Number of pages10
JournalJournal of Membrane Science
Volume415-416
DOIs
StatePublished - Oct 2012
Externally publishedYes

Fingerprint Dive into the research topics of 'Fabrication variables affecting the structure and properties of supported carbon molecular sieve membranes for hydrogen separation'. Together they form a unique fingerprint.

Cite this