Fabrication of electrospun nanofibrous membranes for membrane distillation application

Lijo Francis, Husnul Maab, Ahmad Salem Alsaadi, Suzana Pereira Nunes, NorEddine Ghaffour, Gary L. Amy

Research output: Contribution to journalArticlepeer-review

38 Scopus citations

Abstract

Nanofibrous membranes of Matrimid have been successfully fabricated using an electrospinning technique under optimized conditions. Nanofibrous membranes are found to be highly hydrophobic with a high water contact angle of 130°. Field emission scanning electron microscopy and pore size distribution analysis revealed the big pore size structure of electrospun membranes to be greater than 2 μm and the pore size distribution is found to be narrow. Flat sheet Matrimid membranes were fabricated via casting followed by phase inversion. The morphology, pore size distribution, and water contact angle were measured and compared with the electrospun membranes. Both membranes fabricated by electrospinning and phase inversion techniques were tested in a direct contact membrane distillation process. Electrospun membranes showed high water vapor flux of 56 kg/m2-h, which is very high compared to the casted membrane as well as most of the fabricated and commercially available highly hydrophobic membranes. ©2013 Desalination Publications.
Original languageEnglish (US)
Pages (from-to)1337-1343
Number of pages7
JournalDesalination and Water Treatment
Volume51
Issue number7-9
DOIs
StatePublished - Feb 2013

ASJC Scopus subject areas

  • Pollution
  • Water Science and Technology
  • Ocean Engineering

Fingerprint Dive into the research topics of 'Fabrication of electrospun nanofibrous membranes for membrane distillation application'. Together they form a unique fingerprint.

Cite this