Exploration of heat release in a homogeneous charge compression ignition engine with primary reference fuels

David Vuilleumier, Hatem Selim, Robert Dibble, Subram Sarathy*

*Corresponding author for this work

Research output: Contribution to journalConference articlepeer-review

19 Scopus citations

Abstract

This study utilizes homogeneous charge compression ignition (HCCI) engine experiments to characterize fuel effects on Low Temperature Heat Release (LTHR) and Intermediate Temperature Heat Release (ITHR) of different primary reference fuel (PRF) mixtures. Experiments varied intake pressure from naturally aspirated to 1.8 bar boosted conditions, equivalence ratio from φ=0.3 to 0.4, and a variety of different fuel mixtures (PRF 85 to PRF 100). The engine experiments were used to guide single-zone HCCI simulations, using detailed chemical kinetic mechanisms comprising PRF mixtures. The experiments revealed important trends related to pre-ignition reactions in blends of iso-octane and n-heptane. As previous research has found, the pre-ignition reactions seen in these mixtures have a high sensitivity to pressure. Intake pressures below 1.4 bar showed no LTHR and minimal ITHR for all of the fuels tested, while pressures of 1.4 bar and above showed varying onsets of LTHR based on mixture composition. It was also found that significant increases in ITHR were coupled with increases in LTHR. Simulated heat release profiles of different PRF mixtures were examined and compared with the experimental results. The simulations results showed good agreement with the experiments for different fuels at low pressures. However, at higher pressures, the expected LTHR and ITHR profiles at the given experimental conditions were not observed. Sensitivity analysis was conducted to identity the fuel mixtures and pressures needed for to exhibit similar heat release profiles as the experiments. The simulation results were used to identify the dominant reaction pathways contributing to ITHR under various conditions.

Original languageEnglish (US)
JournalSAE Technical Papers
Volume11
DOIs
StatePublished - Jan 1 2013
EventSAE/KSAE 2013 International Powertrains, Fuels and Lubricants Meeting, FFL 2013 - Seoul, Korea, Republic of
Duration: Oct 21 2013Oct 23 2013

ASJC Scopus subject areas

  • Automotive Engineering
  • Safety, Risk, Reliability and Quality
  • Pollution
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'Exploration of heat release in a homogeneous charge compression ignition engine with primary reference fuels'. Together they form a unique fingerprint.

Cite this