Electroosmotic flow pumps with polymer frits

Shulin Zeng, Chuan Hua Chen, Juan G. Santiago, Jing Ran Chen, Richard N. Zare, Jennifer A. Tripp, Frantisek Svec, Jean Frechet

Research output: Contribution to journalArticlepeer-review

107 Scopus citations

Abstract

Electroosmotic flow (EOF) pumps with flow rates on the order of 1ml/min have been designed and fabricated. These pumps use EOF to propel liquid solutions in a compact system with no moving parts. The pumping chamber is filled with densely packed non-porous silica particles, and the particle bed is held in place using two polymeric porous frits. The pump frame is made of acrylic, the frits are made using UV photopolymerization within the custom-built acrylic frame, and the particles are packed using a novel side-bore packing technology. Platinum wire electrodes on both sides of the pump provide the electric field to drive the flow. Deionized water is used as a working fluid in order to minimize Joule heating and increase thermodynamic efficiency. The maximum flow rates and maximum pressures generated by the pumps are 0.8ml/min and 2atm, respectively, at 1.0kV applied voltage.

Original languageEnglish (US)
Pages (from-to)209-212
Number of pages4
JournalSensors and Actuators, B: Chemical
Volume82
Issue number2-3
DOIs
StatePublished - Feb 28 2002

Keywords

  • Elctroosmotic
  • Electrokinetic
  • Large flow rate
  • Pump

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Electroosmotic flow pumps with polymer frits'. Together they form a unique fingerprint.

Cite this