Electrocoagulation of chemical mechanical polishing wastewater

N. Drouiche, NorEddine Ghaffour*, H. Lounici, M. Mameri

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

65 Scopus citations

Abstract

Treatment of chemical mechanical polishing (CMP) wastewater was investigated. The CMP wastewater, as obtained from surface treatment of photovoltaic wafers, was characterized by high suspended solids, high nephelometric turbidity unit (NTU), chemical oxygen demand (COD) and green color. This study determines the feasibility of CMP wastewater treatment by the electrocoagulation process. The COD concentration of the CMP wastewater was found in the range of 700 mg/l which is below the discharge standards. The analysis of the wastewater before and after electrocoagulation shows that the electrochemical process was a total barrier for the metal species, color and a significant reduction in the concentration of the fluoride and sulfate ions.

Original languageEnglish (US)
Pages (from-to)31-37
Number of pages7
JournalDesalination
Volume214
Issue number1-3
DOIs
StatePublished - Aug 15 2007

Keywords

  • Chemical mechanical polishing wastewater
  • Electrocoagulation
  • Wafer

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Science(all)
  • Water Science and Technology
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Electrocoagulation of chemical mechanical polishing wastewater'. Together they form a unique fingerprint.

Cite this