Effects of DME mixing on number density and size properties of soot particles in counterflow non-premixed ethylene flames

J. H. Choi, B. C. Choi, S. M. Lee, Suk Ho Chung, K. S. Jung, W. L. Jeong, S. K. Choi, S. K. Park

Research output: Contribution to journalArticlepeer-review

10 Scopus citations

Abstract

In order to investigate the effect of DME mixing on the number density and size of soot particles, DME was mixed in a counter flow non-premixed ethylene flame with mixture ratios of 5%, 14% and 30%. A laser extinction/scattering technique has been adopted to measure the volume fraction, number density, and mean size of soot particles. The experimental results showed that the highest soot concentrations were observed for flames with mixture ratios of 5% and 14%; however, for a mixture ratio of 30% the soot concentration decreased. Numerical results showed that the concentrations of propargyl radicals (C3H3) at the 5% and 14% ratios were higher than those measured in the ethylene-based flame, and the production of benzene (C6H6) in the 5% and 14% DME mixture flames was also increased. This indicates the crucial role of propargyl in benzene ring formation. These reactions generally become stronger with increased DME mixing, except for A1- + H2 → A1 + H (-R554) and n-C4H5 + C2H2 → A1 + H (R542). Therefore, it is indicated that adding DME to ethylene flames promotes benzene ring formation. Note that although the maximum C6H6 concentration is largest in the 30% DME mixing flame, the soot volume fraction is smaller than those for the 5% and 14% mixture ratios. This is because the local C6H6 concentration decreases in the relatively low temperature region in the fuel side where soot growth occurs. © 2015, The Korean Society of Mechanical Engineers and Springer-Verlag Berlin Heidelberg.
Original languageEnglish (US)
Pages (from-to)2259-2267
Number of pages9
JournalJournal of Mechanical Science and Technology
Volume29
Issue number5
DOIs
StatePublished - May 16 2015

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Effects of DME mixing on number density and size properties of soot particles in counterflow non-premixed ethylene flames'. Together they form a unique fingerprint.

Cite this