Effect of excess oxygen in plasma reforming of diesel fuel

Dae Hoon Lee, Kwan Tae Kim, Min Suk Cha, Young Hoon Song*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

41 Scopus citations

Abstract

This study investigated the plasma reforming process for diesel focusing on the relative ratio of oxygen to fuel. Excess O2 in the partial oxidation process is known to increase the combustion portion, resulting in a decreased yield of H2 and CO. However, in this parametric investigation, there was no apparent decrease in the H2 and CO selectivity. Adding O2 did not increase the portion of combustion in the overall reaction. Rather, an excess O2 supply from partial oxidation stoichiometry resulted in an increase in CO2 selectivity without a reduction in CO selectivity. Heavy hydrocarbon species were identified as a source of CO2 in excess O2 conditions due to preferential oxidative cracking. The additional oxidation of C1-C4 species by excess O2 provided a minor contribution to CO2. Excess O2 affects soot generation characteristics by suppressing the agglomeration of soot particles, resulting in smaller particle generation. However, the oxidation of soot particles does not provide a major contribution to increasing the CO2 selectivity. The results show that in a real reforming process, controlling the O2 supply does not have a strong effect on the process selectivity of hydrogen.

Original languageEnglish (US)
Pages (from-to)4668-4675
Number of pages8
JournalInternational Journal of Hydrogen Energy
Volume35
Issue number10
DOIs
StatePublished - May 2010
Externally publishedYes

Keywords

  • Diesel
  • Oxygen to carbon ratio
  • Plasma
  • Reforming

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Fuel Technology
  • Condensed Matter Physics
  • Energy Engineering and Power Technology

Cite this