Effect of dilution, pressure, and velocity on smoke point in laminar jet flames

T. L.Berry Yelverton, William Roberts

Research output: Contribution to journalArticlepeer-review

12 Scopus citations

Abstract

Smoke point measurements of diluted methane and ethylene flames were made in a co-flowing laminar jet diffusion flame at pressures up to 8atm. The smoke point corresponds to the fuel flow rate where the soot production is exactly offset by the soot oxidation, and as such is sensitive to changes in rates of production or oxidation. Flame height in these flames was measured as a function of pressure, diluent, and dilution level as well as both fuel exit velocity profile (i.e., plug or parabolic) and fuel/air velocity ratio. As pressure increases, the smoke point became less sensitive to diluent or dilution level. In addition to heat capacity and thermal diffusivity differences between CO2 and He for example, the large differences in kinematic viscosity was shown to play an important role in the diluent's ability to suppress the fuel's propensity to form soot.

Original languageEnglish (US)
Pages (from-to)1334-1346
Number of pages13
JournalCombustion Science and Technology
Volume180
Issue number7
DOIs
StatePublished - Jul 1 2008

Keywords

  • Diffusion flame
  • Dilution
  • High-pressure
  • Smoke point
  • Soot
  • Velocity profile

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Effect of dilution, pressure, and velocity on smoke point in laminar jet flames'. Together they form a unique fingerprint.

Cite this