Draw solute induced scaling during ammonia-carbon dioxide forward osmosis desalination

Zhenyu Li*, Rodrigo Valladares Linares, Muhannad Abu-Ghadaib, Gary Lee Amy

*Corresponding author for this work

Research output: Contribution to conferencePaperpeer-review

Abstract

Forward osmosis (FO), an osmotic-driven membrane process, has been gaining attention for being a low-energy alternative for several applications usually performed by pressure-driven membranes, such as reverse osmosis (RO) and nanofiltration (NF). The FO process requires a draw solution (DS) to create the osmotic pressure as a driving force to separate fresh water from the saline feed water acting as the feed solution (FS). A solution of an ammonium salt (a mixture of ammonium bicarbonate, ammonium carbonate and ammonium carbamate) has shown its potential to be a favorable, thermolytic DS since it can be easily treated by moderate heating (e.g. waste heat) to remove the ammonium salt solutes, producing fresh water and recovering the DS components (McCutcheon et al., 2005). In the present study, an ammonium bicarbonate solution was employed as the DS to desalinate natural seawater (SW) from the Red Sea. The performance of the process, including the flux patterns and reverse draw solute leakage was evaluated. Special attention was given to the scaling on the membrane surface.

Original languageEnglish (US)
StatePublished - Jan 1 2014
EventAWWA/AMTA 2014 Membrane Technology Conference and Exposition - Las Vegas, NV, United States
Duration: Mar 10 2014Mar 14 2014

Other

OtherAWWA/AMTA 2014 Membrane Technology Conference and Exposition
CountryUnited States
CityLas Vegas, NV
Period03/10/1403/14/14

ASJC Scopus subject areas

  • Filtration and Separation

Fingerprint

Dive into the research topics of 'Draw solute induced scaling during ammonia-carbon dioxide forward osmosis desalination'. Together they form a unique fingerprint.

Cite this