Design and VLSI implementation for a WCDMA multipath searcher

Eugene Grayver, Jean François Frigon, Ahmed M. Eltawil, Alireza Tarighat, Kambiz Shoarinejad, Aliazam Abbasfar, Danijela Čabrić, Babak Daneshrad

Research output: Contribution to journalArticlepeer-review

15 Scopus citations

Abstract

The third generation (3G) of cellular communications standards is based on wideband CDMA. The wideband signal experiences frequency selective fading due to multipath propagation. To mitigate this effect, a RAKE receiver is typically used to coherently combine the signal energy received on different multipaths. An effective multipath searcher is, therefore, required to identify the delayed versions of the transmitted signal with low probability of false alarm and misdetection. This paper presents an efficient and novel WCDMA multipath searcher design and VLSI architecture that provides a good compromise between complexity, performance, and power consumption. Novel multipath searcher algorithms such as time domain interleaving and peak detection are also presented. The proposed searcher was implemented in 0.18 μm CMOS technology and requires only 150 k gates for a total area of 1.5 mm2 consuming 6.6 mw at 100 MHz. The functionality and performance of the searcher was verified under realistic conditions using a channel emulator. © 2005 IEEE.
Original languageEnglish (US)
JournalIEEE Transactions on Vehicular Technology
Volume54
Issue number3
DOIs
StatePublished - May 1 2005
Externally publishedYes

Fingerprint Dive into the research topics of 'Design and VLSI implementation for a WCDMA multipath searcher'. Together they form a unique fingerprint.

Cite this