Deformation and reinforcement of thin-film composite (TFC) polyamide-imide (PAI) membranes for osmotic power generation

Xue Li, Sui Zhang, Fengjiang Fu, Tai-Shung Chung*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

110 Scopus citations

Abstract

To understand the deformation of thin-film composite (TFC) membranes in high-pressure pressure retarded osmosis (PRO) processes, TFC membranes have been fabricated by interfacial polymerization upon Torlon® polyamide-imide (PAI) porous substrates. Experimental results show that reinforcements can be achieved by controlling the chemistry and morphology of the substrate and TFC polyamide layer. The PAI substrate exhibits reinforced properties and performance by pre-compression and polydopamine (PDA) cross-linking modification, while the interfacial properties between the substrate and TFC layer are improved by the adhesive PDA cushion layer. The responses of the modified PAI substrate under high pressures have been examined in terms of structural compaction and permeation decline. When subjected to a hydraulic pressure of 14bar for periods up to 1600min, the PDA modified substrate exhibits a better mechanical stability and less deformation. The PDA modified substrate shows a steady-state water permeability that doubles the steady-state value of the unmodified substrate. In addition, casting membranes on polyester fabrics and post-treatments by chloride and ethanol show positive effects on membrane performance in PRO processes. As a result, the modified TFC membrane achieves a 3-fold increment in water flux and a 16-fold rise in power density (2.84W/m2 vs. 0.16W/m2) as compared with the unmodified TFC membrane. Positron annihilation spectroscopy (PAS) has been employed to investigate membrane morphological changes after high pressure PRO processes. The high hydraulic pressure mainly deforms the porous substrate but has little effect on the TFC dense layer. These results may provide important insights into the hydraulic characteristics of TFC membranes and are essential to the design of PRO membranes for osmotic power generation.

Original languageEnglish (US)
Pages (from-to)204-217
Number of pages14
JournalJournal of Membrane Science
Volume434
DOIs
StatePublished - May 1 2013

Keywords

  • Osmotic power generation
  • Polyamide-imide
  • Polydopamine
  • Pressure retarded osmosis
  • Thin-film composite membrane

ASJC Scopus subject areas

  • Biochemistry
  • Materials Science(all)
  • Physical and Theoretical Chemistry
  • Filtration and Separation

Fingerprint

Dive into the research topics of 'Deformation and reinforcement of thin-film composite (TFC) polyamide-imide (PAI) membranes for osmotic power generation'. Together they form a unique fingerprint.

Cite this