Contactless flow detection with magnetostrictive bilayers

S. Traxler*, J. Kosel, H. Pfützner, E. Kaniusas, L. Mehnen, I. Giouroudi

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

13 Scopus citations

Abstract

The paper concerns the contactless detection of an airflow through a tube by the use of a magnetostrictive bilayer strip as a sensor element. A bilayer mounted in the tube is magnetized by an exterior excitation coil. Due to its non-linear behavior, the bilayer generates a field exhibiting higher order harmonics which are detected by an exterior induction coil. The airflow yields bending of the bilayer and thus changed harmonic response, as a basis of signal establishment. For flow dynamics of 10 Hz, effective results are presented for different induction coil positions allowing flexible adjustments to individual geometric conditions. Furthermore, the shielding effect of conductive tube material (such as aluminum, copper and non-magnetic steel) was analyzed, the results indicating the need of low magnetization frequency. Finally, the significance of bilayer length was studied, increasing values yields high sensitivity, however, linked with decreasing mechanical resonance which is relevant in cases of high dynamic of airflow.

Original languageEnglish (US)
Pages (from-to)491-495
Number of pages5
JournalSensors and Actuators, A: Physical
Volume142
Issue number2
DOIs
StatePublished - Apr 10 2008
Externally publishedYes

Keywords

  • Contactless signal detection
  • Flow measurement
  • Magnetostrictive material
  • Multifunctional sensors

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Instrumentation

Fingerprint

Dive into the research topics of 'Contactless flow detection with magnetostrictive bilayers'. Together they form a unique fingerprint.

Cite this