The half-bridge modular multilevel converter (HB-MMC) is one of the most promising topologies for high-voltage direct current (HVDC) systems. Unlike full-bridge MMC (FB-MMC) and clamp double sub-module MMC (CDSM-MMC), HB-MMCs are defenceless against DC side faults. Different types of DC circuit breakers (DC CBs) assisted with arrester banks/damping resistors such as solid-state CB and hybrid DC CBs can be used to interrupt the DC fault current. Arrester banks are used to protect against overvoltage after interrupting the fault current and in turn to demagnetise the circuit inductors. The main disadvantage of the arresters is that they forcibly break apart when they are overloaded. In this study, an arrester-less fault current limiter is proposed for HB-MMC configuration, which provides an opposing voltage during the DC side fault. This is achieved by inserting external pre-charged capacitors in the DC current path during the fault. The selection of these external capacitors, their suitable initial voltages, and their charging stations are also presented in this study. A comparison between the proposed scheme and the CDSM-MMC has been held as well. The proposed protection scheme is assessed using a simulation study for a point-to-point nine-level HB-MMC-based HVDC system.
ASJC Scopus subject areas
- Control and Systems Engineering
- Energy Engineering and Power Technology
- Electrical and Electronic Engineering