An active damping technique for a current source inverter employing a virtual negative inductance

Ahmed Salah Morsy, Shehab Ahmed, Prasad Enjeti, Ahmed Massoud

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Abstract

A grid connected CSI requires a CL filter stage. In this work, the isolation transformer leakage inductance constitutes this filter inductance. This CL filter is lightly damped for efficiency constraints. Hence, it is subject to resonance if excited by inverter current harmonics, pre-existing grid voltage harmonics, or due to step changes in power. Previous work on active damping employed a virtual resistance at high frequencies, including the resonance frequency. However, this method shows limited gain and phase stability margins. In this paper an active damping technique employing a virtual negative inductance for the CSI is proposed. The introduction of a virtual negative inductance around the resonance frequency causes active frequency shifting. The advantages of the proposed system are better time response and increased stability margins. Simulation results for a grid connected CSI have been presented to substantiate the proposed technique. ©2010 IEEE.
Original languageEnglish (US)
Title of host publicationConference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC
DOIs
StatePublished - May 18 2010
Externally publishedYes

Fingerprint Dive into the research topics of 'An active damping technique for a current source inverter employing a virtual negative inductance'. Together they form a unique fingerprint.

Cite this