A half mode inkjet printed tunable ferrite isolator

Farhan A. Ghaffar, Mohammed Vaseem, Joey. R. Bray, Atif Shamim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Abstract

A novel half mode waveguide based ferrite isolator design is presented in this work. For the first time, tunability of the isolation band is demonstrated for a ferrite isolator. Instead of using the conventional antisymmetric bias the isolator requires a single direction of the magnetic bias field due to the half mode operation. Yttrium Iron Garnet (YIG) is used as the substrate for the device. The metallic walls of the waveguide are realized using inkjet printing. The magnetic biasing applied to the waveguide causes the RF waves to experience negative permeability in one direction of propagation hence providing isolation for this direction. For an applied bias of 3000 Oe, the device provides a maximum isolation figure of merit of 76.7 dB at 7.5 GHz. The isolation band can be controlled by changing the applied magnetostatic bias. As the bias is varied from 1500 Oe to 3500 Oe the center frequency of the isolation band varies from 4.45 GHz to 9 GHz. The measured response of the isolator shows that it can be integrated in any RF system requiring lower cost and good isolation.
Original languageEnglish (US)
Title of host publication2017 IEEE MTT-S International Microwave Symposium (IMS)
PublisherInstitute of Electrical and Electronics Engineers (IEEE)
Pages289-291
Number of pages3
ISBN (Print)9781509063604
DOIs
StatePublished - Oct 24 2017

Fingerprint Dive into the research topics of 'A half mode inkjet printed tunable ferrite isolator'. Together they form a unique fingerprint.

Cite this