A Fully Printed Switch Based on VO2 Ink for Reconfigurable RF Components

Mohammad Vaseem, Su Zhen, Shuai Yang, Atif Shamim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Abstract

Recently, vanadium dioxide (VO) has emerged as an attractive phase change material which can be used for reconfigurable or switchable RF components. However, at present, VO is deposited by expensive and complex thin film microfabrication techniques. With the surge in low cost, additively manufactured or printed components, it will be beneficial to print phase change materials or switches as well. The issue is there are no such functional inks available in the market. In this work, we present, for the first time VO based ink that changes its conductive properties based on temperature. Precisely, it displays insulating properties at room temperature (resistance of sim 5mathrm{K}Omega in the off-state), but becomes conductive when heated around 70°C (resistance of sim 10Omega in the on-state). Based on this VO ink and a custom silver-organo-complex (SOC) ink, we demonstrate a fully printed thermally controlled RF switch in this work. In a CPW based shunt configuration, the fully printed switch provides more than 15 dBs of isolation (in the off state) and a 0.5-2 dB of insertion loss (in the on state) from 100 MHz to 30 GHz frequency band. To demonstrate its application, a fully printed frequency reconfigurable planar inverted F antenna (PIFA) has also been demonstrated in this work.
Original languageEnglish (US)
Title of host publication2018 48th European Microwave Conference (EuMC)
PublisherInstitute of Electrical and Electronics Engineers (IEEE)
Pages487-490
Number of pages4
ISBN (Print)9782874870514
DOIs
StatePublished - Dec 7 2018

Fingerprint

Dive into the research topics of 'A Fully Printed Switch Based on VO2 Ink for Reconfigurable RF Components'. Together they form a unique fingerprint.

Cite this